Synthetic products

DAMLA SYNTHETIC PRIMER

Solvent -Borne Alkyed based rust inhibiting primer.Resistant to humidity and sea water.Protects metal from rusting.

PRODUCT GROUP Synthetic Primer
APLICATION AREAS All kinds of exterior and interior metal surfaces.
PREPARATION Dirt,grease,old loose or flaking materials must be removed. Sandblasting and steel brush recommended.
COLOUR NUMBER White
COVERING CAPACITY 13-16 M2/kg dependent on the substrate.
APPLICATION Min. 1 kat
DRYING(25 C) Re-coat after 24 hour.Hard after 48 hours.
APPLICATION MEANS Brush,roller ,spray.
THINNER Thinner.
THINNING INFORMATION 15-10% thinner.
PACKEGE INFORMATION 1 kg,3 kg,20 kg

DAMLA SYNTHETIC ANTİRUST

Solvent -Borne Alkyed based rust inhibiting primer.Resistant to humidity and sea water.Protects metal from rusting.

PRODUCT GROUP Synthetic Primer
APLICATION AREAS All kinds of exterior and interior metal surfaces.
PREPARATION Dirt,grease,old loose or flaking materials must be removed. Sandblasting and steel brush recommended.
COLOUR NUMBER Grey,red and green.
COVERING CAPACITY 9-11 M2/kg dependent on the substrate.
APPLICATION Min. 1 kat
DRYING(25 C) Re-coat after 24 hour.Hard after 48 hours.
APPLICATION MEANS Brush,roller ,spray.
THINNER Thinner.
THINNING INFORMATION 15-10% thinner.
PACKEGE INFORMATION 0.5 kg,1 kg,3 kg,20 kg

LUXE SYNTHETIC TOPCOAT

DAMLA luxe synthetıic topcoat are glossy topcoat paints for interior or
exterior surfaces alkyd based paints.

Kartela
Boykimsan

PRODUCT GROUP Solvent -borne alkyd gloss enamel.
APPLICATION AREAS Wood and metal exterior and interior plus interior walls and ceiling.
PREPARATION Dirt,grease,old loose or flaking materials must be removed. Cracks etc.to be repairedwith Wood Priming oil before application of primer undercoat.Bare metal should be primed with antirust.
COLOUR NUMBER 24 standart production.
COVERING CAPACITY 9-11 M2/lt. dependent on the substrate.
APPLICATION Min. 2 coat.
DRYING(25 C) Re-coat after 24 hour.Hard after 48 hours.
APPLICATION MEANS Brush,roller ,spray.
THINNER Thinner.
THINNING INFORMATION 15-10%
PACKEGE INFORMATION 0.25 LT.,0.375 LT.,0.75 LT.,2.5 LT., 3.75 LT.,15 LT.

CELLULOSIC FILLERS VARNISH

Without disturbing the natural color of wood filled pores, will be applied on the
last be less and consume more saturated varnısh floor, decorative appearance
providing is a product used in all kinds of wood.

PRODUCT GROUP Wood filler solvent.
APLICATION AREAS All kinds of wood surface.
COLOUR NUMBER single color (transparent)
COVERING CAPACITY 10 m2/lt. (According to surface properties vary)
APPLICATION Min. 1 coat
DRYING(25 C) Full dry time max.10 min. 2 hours of sanding time
APPLICATION MEANS Brush,roller ,spray.
THINNER cellulose thinners
PACKEGE INFORMATION 0.75 lt.,2.5 lt.,12 lt.

DAMLA WOOD STAIN

All kinds of wood, mold, worms and fungi in the formation of pores against korur.
Wood does not fill and natural, warm look of wood is colored by protecting.
Is alkyd based.

PRODUCT GROUP Solvent-based wood protector
APPLIED SURFACE VIEW Dull, flat
APPLICATION AREAS Wooden boards, wooden ceilings and In beams, door and window in the framework
COLOUR NUMBER 5-6 colour
COVERING CAPACITY 10 m2/lt. (According to surface properties vary)
APPLICATION Min. 1 coat
DRYING(25 C) Full dry time max.24 hours waiting period between floors of 8 h.
APPLICATION MEANS Brush,roller ,spray
THINNER Synthetic thinner
PACKEGE INFORMATION 0.75 lt.,2.5 lt.,12 lt.

DAMLA PARQUET GLASS POLISH

Protect the color of the wood, which can be applied on all kinds of hardwood,
quick-drying hard film forming, good spread is semi-matt varnish parquet.

PRODUCT GROUP LUSTER
APPLICATION AREAS All kinds of parquet
COLOUR NUMBER TRANSPARENT
COVERING CAPACITY 10 m2/lt. (According to surface properties vary)
APPLICATION Min. 3 coat
DRYING(25 C) Full dry time max.4 days waiting period between floors of 5 h.
APPLICATION MEANS Brush,roller ,spray.
THINNER Synthetic thinner
PACKEGE INFORMATION 0.75 lt.,2.5 lt.,12 lt.

DAMLA YACHT VARNISH

Water in atmospheric conditions, moisture or high gloss durable LUSTER
non-yellowing, hard elastic varnish.

PRODUCT GROUP Solvent-based wood varnish
APPLIED SURFACE VIEW LUSTER
APPLICATION AREAS Doors, windows, garden fences, wooden,Elements of structures and marine vehicles wooden parts.
COLOUR NUMBER TRANSPARENT
COVERING CAPACITY 10 m2/lt. (According to surface properties vary)
APPLICATION 2 coat
DRYING(25 C) Full dry time max.24 hours waiting period between times of 4 h.
APPLICATION MEANS Brush,spray.
THINNER Synthetic thinner
PACKEGE INFORMATION 0.75 lt.,2.5 lt.,12 lt.

SYNTHETIC SATIN ENAMEL

High quality solvent-borne ,odourless satin finish enamel. surfaces alkyd
based paints.

PRODUCT GROUP Solvent -borne alkyd semi-gloss
APPLICATION AREAS Wood and metal exterior and interior plus interior walls in kitchens and bathrooms.
PREPARATION Dirt,grease,old loose or flaking materials must be removed. Cracks etc.to be repaired with Wood Priming oil before application of primer undercoat.Bare metal should be primed with antirust.
COLOUR NUMBER 10 standart production.
COVERING CAPACITY 10-12 M2/lt. dependent on the substrate.
APPLICATION Min. 2 coat
DRYING(25 C) Re-coat after 24 hour.Hard after 48 hours.
APPLICATION MEANS Brush,roller ,spray.
THINNER Thinner.
THINNING INFORMATION 15-10%
PACKEGE INFORMATION 3.75 LT.,15 LT.